CSM-HJ Air Classifying Mill

Compact structure, easy to disassemble and clean, low cost.

Integration of grinding and classifying, classifying wheel of the grinder is adjusted to obtain ideal particle.

Available D50:3～45μm.

Wide application in pharmaceutical, food and chemical sectors, high cost-performance.

Side opening door

side opening door design is easy for maintenance

PLC control

Using PLC programming control, achieve hierarchical authority management

Easy replacement

good heat dissipation, easy replacement, upgrade to water cooling

Forced grinding

Double hammer structure, secondary eddy current superposition, stronger grinding force

Working Principle

The material is evenly fed into the grinding chamber by the feeding system, strongly impacted by the high-speed rotating grinding disc.
At the same time, it is subjected to centrifugal force and collides with the grinding ring gear, and is subjected to various comprehensive forces such as shearing, friction and collision to finished grinding.
The grinded material moves to the classifying zone with the airflow.
The classifier is adjusted by frequency conversion, separates the coarse and fine materials, the product that meet the fineness requirement enters the cyclone collector and the dust collector with the airflow, and the coarse powders return to the classifying zone, secondary grinding.

Parameters

Parameter		CSM-280HJ	CSM-400HJ	CSM-600HJ	CSM-800HJ	CSM-1000HJ	CSM-1250HJ
Power (kw)	Grinding Disc	7.5	18.5	30	45~55	75~90	132
	Classifier Impeller	4	4	11~15	15	22	30
	Feeder	0.55~1.1
Rotate Speed(r/min)	Grinding Disc	7500	5250	3350	2625	2100	1700
	Classifier Impeller	1000~8500	800~6000	600~4000	500~3000	400~2250	300~2000
	Feeder	20~100
Max Air Flow(m³/h)		500	1200	3000	4800	9000	12000
Product Size(um)		5~300			10~300
Production Capacity(kg/h)		2~120	15~600	25~1000	30~1500	60~2000	100~3000

Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.

Product Atlas

Application case

04/12/2019

India a chemical plant, chemical materials produce 100KG/H, particle size D90:45μm, Impact Mill Production Line

04/12/2019

India a coking plant, desulfurizer produce 3T/H, particle size D90:15μm, 2 sets of Classifier Mill Production Line

04/12/2019

Vietnam a chemical plant, paint slag produce 2T/H, particle size D90:25μm, Classifier Mill Production Line

04/12/2019

Vietnam a feed plant, tapioca produce 1T/H, particle size D90:45μm, Classifier Mill Production Line

04/12/2019

Thailand a feed plant, sea cucumber feed produce 100KG/H, particle size D90:45μm, Classifier Mill Production Line

04/12/2019

Malaysia a feed plant, sea cucumber feed produce 100KG/H, particle size D90:15μm, Classifier Mill Production Line

ONE-STEP TURNKEY PROJECT

You won’t have any scruple

1-3 months delivery date

Under the premise of guaranteeing quality, our delivery time can be 1-3 months.

High price/performance ratio

We have the same quality as Germany and Japan brand, but the price is only 1/3.

Warranty

1 to 2 years of quality assurance

Installation

On-site guidance installation

TELL US YOUR DEMAND

Thank you for your interest in ALPA, please fill out the form below and we will have a expert contact with you to discuss your demand for equipment and process.