MZ Vibration Mill

Suitable for grinding raw materials with Moh’s hardness below 9.

Compared with ball mill, higher grinding efficiency, small occupation.

Particle size can be adjustable by adjusting parameters such as grinding medium, amplitude, and frequency. The finer powder can be given in conjunction with classifier in series.

Suitable for powder mixing, surface coating.

Product size is easy to adjust

The product particle size can be changed by adjusting feed amount, grinding media, amplitude etc..

PLC control

Using PLC programming control, achieve hierarchical authority management

Wear resistant, less polluting

Grinding media and liners can be made of special materials such as high manganese steel, high chromium steel, stainless steel, alumina, zirconia, quartz, etc..

Air or rubber spring

Instead of hard spring, long service life, good damping effect and low noise

Working Principle

With the high-speed vibrator or vibration motor, the grinding media (pins, cylpebs or balls) would vibrate in high frequency, high-speed rotating and slow revolving, which would impact, rub and shear materials around them and make them into fine powder and mix them evenly.

Parameters

Medium and small Amplitude Vibration Mill Technical Parameter

Parameter	MZ10	MZ30	MZ50	MZ100	MZ200	MZ300	MZ500
Chamber Volume(L)	10	30	50	100	200	300	500
Input Particle Size (mm)	5	5	5	10	10	10	10
Produce Size (um)	10-150	10-150	10-150	10-150	10-150	10-150	10-150
Production Capacity (kg/h)	1-5	5-20	10-50	20-150	50-300	100-500	150-800
Power (KW)	0.75	1.5	2.2	3.7	7.5	11	15

Big Amplitude Vibration Mill Technical Parameter

Parameter	MZ100	MZ300	MZ500	MZ600	MZ800	MZ1000	MZ1200	MZ2000
Chamber Volume(L)	100	300	500	600	800	1000	1200	2000
Input Particle Size (mm)	5	5	5	5	5	5	5	5
Produce Size (um)	10-150	10-150	10-150	10-150	10-150	10-150	10-150	10-150
Production Capacity (kg/h)	100-200	200-300	300-600	400-800	500-1000	800-1500	1000-1800	2000-3000
Power (KW)	15	45	55	75	90	110	150	220

Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.

Product Atlas

Application case

04/13/2019

Uzbekistan a building material factory, cement powder output 500KG/H, particle size D90:10μm, Vibration Mill Production Line

04/13/2019

Israel a building material factory, ultrafine building material powder, output 600KG/H, particle size D90:10μm, Vibration Mill Production Line

04/13/2019

Pakistan a chemical factory, Inorganic pigment powder, output 500KG/H, particle size D97:10μm, Vibration Mill Production Line

04/13/2019

Lebanon a mineral company, barite powder output 1T/H, particle size D50:3μm, Vibration Mill Production Line

04/13/2019

Peru a building material factory, ultrafine cement powder output 800KG/H, particle size D90:10μm, Vibration Mill Production Line

04/13/2019

Ghana a food factory, matcha powder output 100KG/H, particle size D90:23μm, 6 sets of Jet Mill Production Line

ONE-STEP TURNKEY PROJECT

You won’t have any scruple

1-3 months delivery date

Under the premise of guaranteeing quality, our delivery time can be 1-3 months.

High price/performance ratio

We have the same quality as Germany and Japan brand, but the price is only 1/3.

Warranty

1 to 2 years of quality assurance

Installation

On-site guidance installation

TELL US YOUR DEMAND

Thank you for your interest in ALPA, please fill out the form below and we will have a expert contact with you to discuss your demand for equipment and process.