No sieve, smooth discharge, high capacity and low operation cost.
Single or double drive, high line speed, finer particle size.
Available D50:10-45μm.
No screen structure, low calorific value, particle size could be adjusted by high frequency
Using PLC programming control, achieve hierarchical authority management
In strict accordance with the process requirements, the gap is around 2-3mm
Different installation combinations, applicable to different process requirements
A pin mill(pin mill grinding,micro pin mill,fine pin mill,pin mill grinding, pin mill Crush, pin mill pulverizer,pin grinding equipment) is a mill machine that comminutes materials by the action of pins that repeatedly move past each other. Much like a kitchen blender, it breaks up substances through repeated impact.
The mill is a type of vertical shaft impactor mill and consists of two rotating discs with pins embedded on one face. The discs are arrayed parallel to each other so that the pins of one disk face those of the other. The substance to be homogenized is fed into the space between the disks and either one or both disks are rotated at high speeds.
Pin mills can be used on both dry substances and liquid suspensions.
Pin mills are commonly use in the manufacture of pharmaceuticals, as they can achieve particle sizes as low as a few micrometers.
The material is evenly fed into the grinding chamber by the feeding system, strongly impacted by the high-speed rotating disc. At the same time, it is subjected to various comprehensive forces such as friction, shearing and collision between the static disc and the ring gear to grind material. The moving disc and static disc can be combined in different structural forms according to nature of material to meet the grinding requirements of different materials.
ALPA is China’s largest pin mill manufacturer and supplier. We have an advanced factory that offers unique processes and designs.
| Parameter | 160 | 250 | 360 | 500 | 630 | 800 | |
|---|---|---|---|---|---|---|---|
| Turbo B | Grinding Disc Diameter（mm） | 150 | 250 | 350 | 500 | 600 | 720 |
| Max Rotate Speed（r/min） | 12000 | 7500 | 5550 | 3850 | 3200 | 2800 | |
| Power（kw） | 3~4 | 5.5~7.5 | 11~15 | 18.5~30 | 30~45 | 37~75 | |
| Produce Size (Mesh) | 20~325 | ||||||
| Production Capacity（Kg/h） | 5~50 | 15~200 | 25~500 | 30~1200 | 50~1800 | 60~2000 | |
| Pin Type P | Grinding Disc Diameter（mm） | 160 | 260 | 360 | 520 | 630 | 730 |
| Max Rotate Speed（r/min） | 12000 | 7500 | 5550 | 3850 | 3200 | 2800 | |
| Power（kw） | 4 | 7.5 | 15~22 | 37 | 45~55 | 55~75 | |
| Produce Size (Mesh) | 20~325 | ||||||
| Production Capacity（Kg/h） | 20~200 | 35~1000 | 50~2000 | 75~3000 | 100~5000 | 200~10000 | |
Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.
Under the premise of guaranteeing quality, our delivery time can be 1-3 months.
We have the same quality as Germany and Japan brand, but the price is only 1/3.
1 to 2 years of quality assurance
On-site guidance installation
Thank you for your interest in ALPA, please fill out the form below and we will have a expert contact with you to discuss your demand for equipment and process.