Conic rotor and stator are installed, fineness and output can be controlled by adjusting the gap between the rotor and the stator.
The rotor and the stator are made of special wear-resistant steel and thus have long service life.
The linear speed of grinding rotor can be up to 130m/s, good grinding effect.
Suitable for depolymerizing nano and micron material.
Convenient to adjust the distance between mill rotor and ring gear 2-6mm, do not change the speed
Can realize coating and dispersing integration through external hot air source, up to 6 layers of wear-resistant powder plate
Using PLC programming control, achieve hierarchical authority management
Make the drive run smoothly
| Parameters/specifications | Rotor Diameter(mm) | Power (kw) | Rotate Speed(Max r/min) | Maximal Air Volume（m3/h） | Fineness（um） | Output(kg/h) |
|---|---|---|---|---|---|---|
| RTM－300H | 300 | 18.5~22 | 7550 | 1600 | 5~250 | 30~800 |
| RTM－500H | 500 | 45 | 4700 | 2400 | 5~250 | 80~2000 |
| RTM－750V | 750 | 55~75 | 3000 | 3600 | 5~250 | 100~3000 |
| RTM－1000V | 1000 | 90~110 | 2250 | 4800 | 5~250 | 200~4500 |
| RTM－1250V | 1250 | 110~132 | 1800 | 6000 | 5~250 | 300~6000 |
Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.
Under the premise of guaranteeing quality, our delivery time can be 1-3 months.
We have the same quality as Germany and Japan brand, but the price is only 1/3.
1 to 2 years of quality assurance
On-site guidance installation
Thank you for your interest in ALPA, please fill out the form below and we will have a expert contact with you to discuss your demand for equipment and process.